BELL SATELLITE 91 AND 82
Cant get my dish to pick up both 82 & 91 at the same time
Bell Expressview satellite 91 and 82 issues Tkingsbury Sep 26, 2021 10 Oct 4, 2021 harshness E Problems Reconnecting Bell 91 After Several Months Ed Goldstein Aug 18, 2021 4 Aug 28, 2021 primestar31 G Can’t get Shaw to work any more ggilbert Aug 18, 2021 10 Aug 27, 2021 joshuals J Dish Distance Jimmydedog Mar 28, 2022 1 Mar 28, 2022 harshness G
How to connect Bell satellite dish LNBs to the receiver?
With SW21, all you need to do is input one cable from the LNB that captures 91° satellite and input another cable from the LNB that captures 82° (see image below). The output of the SW21 switch will connect to the receiver and you will be ready to receive signal from both satellites using this setup. Since each LNB has 2 output ports ...
Bell Expressview satellite 91 and 82 issues | SatelliteGuys.US
This spring we seemed to have issues with HD channels coming from the 82 satellite. I checked the strength, I have 100% on 91 telling me its pretty much locked in, but 52-60 on 82 and sometimes it seemed to fluctuate lower. I thought ok. maybe the line or the head on the dish. i ran a new line down to the dish and seemed to be the same.
How to point your Bell satellite dish? – Home Tech Experts
On the TV, set the satellite to 91 and the transponder to 1. If you don't know how to get to this screen, press Menu and then numbers 6, 1, 1 on your receiver remote. Now you are ready to point the satellite. Tip: Either have someone watch the TV screen while you move the dish sideways or setup the TV somewhere where you can see the TV screen ...
New Connection for Satellite 91 and 82
If you are just using 1 LNBF to do the aiming as suggested (91 LNBF in the 119 slot) and are hitting 82 you need to keep trying. Further West and higher is where 91 should be. After setting the skew for your location you should not need to change it again, unless the Mast is NOT vertical.
Difference between Bell ExpressVu satellites 91 and 82?
I'm trying to set up my ExpressVu and I'm locked on to satellite 82 (100% signal). The problem is that I'm not able to use it or watch any shows. When it tries to download the program data, it says it's using sat 91, but I have no signal on 91. I can't find anywhere in the menu how to change it to tell it to use sat 82.
Bell Sateliite tv at cottage: changing from old dish to new
To get 91 & 82 at the same time you also need a dish that can rotate like a steering wheel, 91 is higher in the sky and I've never been able to get both at the same time without turning the dish so one lnb is higher than the other, might be possible without but with likely very low signal on 82 that won't lock which is also a weaker signal on …
Satellite installer told me that all Bell standard def receivers will ...
91 will still be in use but it will be for HD channels like Nimiq 4 at 82. Nimiq 6 is at 91 currenly and is newer than Nimiq 4 at 82 so there's no way they would stop using their newest satellite unless something happen to it. Splitting the HD load between both satellites would be better overall in term of image quality and signal.
Nimiq 91/82 Canadian Satellite install on a narrow lot on a hillside.
The line of sight for Nimiq 91/82 meant I had to... This small house on a hillside with a narrow lot didn't have alot of options. Dish was mounted on the front. The line of sight for Nimiq 91/82 ...
Subscribe to our offers
Receive up to date offers and the latest offers by e-mail.
